This light model was developed for mobile applications. The camera is based on the sensor MT9M413 Color/Monochrome. For image read out an external PCIE x1 cable is used. The model can be configured also as en embedded installation with an embedded computer, with a high–speed flat cable instead of an external cable connector.
HSC-SA-1-4 can be connected to a notebook via an Express Card PCIE bus extender or with the desktop via a PCIE Bus Extender card. A comparatively low power consumption allows the use of an external battery of 6-14 V.
The camera has a “micro frame grabber” mode which allows image capturing with a maximum performance of the used image sensor (500 fps), however, the maximum recording time is limited to up to 0.8 s for full resolution, i.e. appr. 350-380 frames for 8 bpp.
HSC-SA-1-4 can be connected to a notebook via an Express Card PCIE bus extender or with the desktop via a PCIE Bus Extender card. A comparatively low power consumption allows the use of an external battery of 6-14 V.
The camera has a “micro frame grabber” mode which allows image capturing with a maximum performance of the used image sensor (500 fps), however, the maximum recording time is limited to up to 0.8 s for full resolution, i.e. appr. 350-380 frames for 8 bpp.
PRELIMINARY TECHNICAL SPECIFICATIONS:
This Sensor type: CMOS
Sensor diagonal 19.7 mm
Resolution 1280 * 1024
Pixel size 12 x 12 μm
Optical format: 1-inch
Shutter Global shutter
Bit per Pixel 8/10*
Frame rate at full resolution 500
Image read out External Cabling PCI Express x1 Gen1
Synchronization Free run, external trigger,
software trigger
Trigger Signal TTL/open collector,
Rising/falling edge
Exposure control: software
Micro Frame Grabber Recording time up 0.74 sec at 8 bpp
Continuous readout perfomance up to 170 fps at 8 bpp
Exposure during read out
ROI on single window
Standard Lens Mount: C-Mount
Power: DC 12 v, 5W
Dimensions: 90 x 90 x 48 mm
Accessories: User Software, Manual, Power Supply, API SDK
Windows/Linux
* - avalaible 10-to-8 pixels bit shift mode